QD77MS 1축 파라미터 UN\G 미쯔비시 서보1축 파라미터 열람.

어우 진짜 한번씩 찾기 드릅게 힘드네 아오아오!!

DMOV K10000 U2\G312 예를 들면 이런식으로..

Buffer memory area configuration			Buffer memory address Un\G[]
					Axis No.	1
			QD77MS16		QD77GF16
			Min.	Max.	Min.	Max.
Parameter area	Basic parameter area	Basic parameter 1	Un\G0	Un\G15	Un\G0	Un\G15
		Basic parameter 2
	Detailed parameter area	Detailed parameter 1	Un\G17	Un\G69	Un\G17	Un\G69
		Detailed parameter 2
	HPR basic parameter area	HPR basic parameter	Un\G70	Un\G78	Un\G70	Un\G78
	HPR detailed parameter area	HPR detailed parameter	Un\G79	Un\G91	Un\G79	Un\G89
	Expansion parameter area	Expansion parameter	Un\G100	Un\G114	Un\G105	Un\G113
Monitor data area	System monitor area	System monitor data	Un\G4000	Un\G4299	Un\G4000	Un\G4299
			Un\G31300	Un\G31549	Un\G31300	Un\G31549
	Axis monitor area	Axis monitor data [Md.20 to]	Un\G2400	Un\G2499	Un\G2400	Un\G2499
		Axis monitor data [Md.100 to]
		Axis monitor data [Md.500 to]	Un\G59300	Un\G59302	-
Control data area	System control data area	System control data	Un\G5900	Un\G5999	Un\G5900	Un\G5999
	Axis control data area	Axis control data [Cd.3 to]	Un\G4300	Un\G4399	Un\G4300	Un\G4399
		Axis control data [Cd.100 to]
	Expansion axis control data area	Expansion axis control data	Un\G30100	Un\G30109	Un\G30100	Un\G30109
Positioning data area	Positioning data area (No.1 to 100)		Un\G6000	Un\G6999	Un\G6000	Un\G6999
	Positioning data area (No.101 to 600)		Setting by this tool.		Setting by this tool.
Block start data area	(Block No.7000 to 7001)	Block start data area	Un\G22000	Un\G22299	Un\G22000	Un\G22299
		Condition data area	Un\G22100	Un\G22399	Un\G22100	Un\G22399
	(Block No.7002 to 7004)	Block start data area	Setting by this tool.		Setting by this tool.
		Condition data area
PLC CPU memo area			Un\G30000	Un\G30099	Un\G30000	Un\G30099
Servo parameter area (Note-1) : Including in the case MR-J4-[ ]B is used as MR-J3-[ ]B compatibility mode. (Note-2) : Valid on MR-J4-[ ]B using.	Basic setting parameter area	Pr.100 to Pr.118 (Servo series & PA01 to PA18) (Note-1)	Un\G28400	Un\G28418	Un\G28400	Un\G28401
		Pr.332 (PA19) (Note-1)	Setting by this tool.		Setting by this tool.
		(PA20 to PA32) (Note-2)	Un\G64400	Un\G64412
	Gain/filter setting parameter area	Pr.119 to Pr.163 (PB01 to PB45) (Note-1)	Un\G28419	Un\G28463
		(PB46 to PB64) (Note-2)	Un\G64413	Un\G64431
	Expansion setting parameter area	Pr.164 to Pr.195 (PC01 to PC32) (Note-1)	Un\G28464	Un\G28495
		(PC33 to PC64) (Note-2)	Un\G64432	Un\G64463
	Input/output setting parameter area	Pr.196 to Pr.227 (PD01 to PD32) (Note-1)	Setting by this tool.
		(PD33 to PD48) (Note-2)
	Expansion control parameter area	Pr.228 to Pr.267 (PE01 to PE40) (Note-1)
		(PE41 to PE64) (Note-2)
	Special setting parameter area	Pr.268 to Pr.299 (PS01 to PS32) (Note-1)
	Other setting parameter area	Pr.300 to Pr.315 (PF01 to PF16) (Note-1)
		(PF17 to PF48) (Note-2)
	Option unit setting parameter area	Pr.316 to Pr.331 (PO01 to PO16) (Note-1)
		(PO17 to PO32) (Note-2)
	Linear/DD motor setting parameter	(PL01 to PL48) (Note-2)
	Positioning control setting parameter	(PT01 to PT48) (Note-2)
Synchronous control area	Synchronous control's parameter area (Sync.parameter area)	Servo input axis parameter	Un\G32800	Un\G32805	Un\G32800	Un\G32805
		Synchronous encoder axis parameter	Un\G34720	Un\G34735	Un\G34720	Un\G34735
		Synchronous control axis parameter : main shaft module	Un\G36400	Un\G36423	Un\G36400	Un\G36423
		Synchronous control axis parameter : auxiliary shaft module	Un\G36430	Un\G36451	Un\G36430	Un\G36451
		Synchronous control axis parameter : speed change gear module	Un\G36460	Un\G36465	Un\G36460	Un\G36465
		Synchronous control axis parameter : output axis module	Un\G36470	Un\G36486	Un\G36470	Un\G36486
		Synchronous control axis parameter : synchronous control default potision parameter	Un\G35000	Un\G36513	Un\G35000	Un\G36513
	Synchronous control's monitor area (Sync.monitor area)	Servo input axis monitor data	Un\G33120	Un\G33127	Un\G33120	Un\G33127
		Synchronous encoder axis monitor data	Un\G35200	Un\G35212	Un\G35200	Un\G35212
		Synchronous control axis monitor data	Un\G42800	Un\G42915	Un\G42800	Un\G42915
		Cam position calculation monitor data	Un\G53800	Un\G53801	Un\G53800	Un\G53801
	Synchronous control's control data area (Sync.control data area)	Synchronous control system control data	Un\G36320	Un\G36322	Un\G36320	Un\G36322
		Synchronous encoder axis control data	Un\G35040	Un\G35047	Un\G35040	Un\G35047
		Synchronous control axis control data	Un\G44080	Un\G44090	Un\G44080	Un\G44090
		Cam data operation control data	Un\G45000	Un\G53199	Un\G45000	Un\G53199
		Cam generated automatically control data	Un\G53200	Un\G53214	Un\G53200	Un\G53214
		Cam position calculation control data	Un\G53780	Un\G53791	Un\G53780	Un\G53791
Buffer memory area configuration			Buffer memory address Un\G[]
					Mark detection setting No.	1
			QD77MS16		QD77GF16
			Min.	Max.	Min.	Max.
Mark detection area	Mark detection setting parameter		Un\G54000	Un\G54019	Un\G54000	Un\G54019
	Mark detection monitor data		Un\G54960	Un\G55039	Un\G54960	Un\G55039
	Mark detection control data		Un\G54640	Un\G54649	Un\G54640	Un\G54649

Basic parameter 1				Axis No.	1
Pr.[]	Item	Buffer memory address Un\G[]
		QD77MS16		QD77GF16
Pr.1	Unit setting	Un\G0		Un\G0
Pr.4	Unit magnification (AM)	Un\G1		Un\G1
Pr.2	Number of pulses per rotation (AP)	Un\G2		Un\G2
		Un\G3		Un\G3
Pr.3	Movement amount per rotation (AL)	Un\G4		Un\G4
		Un\G5		Un\G5
Pr.7	Bias speed at start	Un\G6		Un\G6
		Un\G7		Un\G7
Basic parameter 2				Axis No.	1
Pr.[]	Item	Buffer memory address Un\G[]
		QD77MS16		QD77GF16
Pr.8	Speed limit value	Un\G10		Un\G10
		Un\G11		Un\G11
Pr.9	Acceleration time 0	Un\G12		Un\G12
		Un\G13		Un\G13
Pr.10	Deceleration time 0	Un\G14		Un\G14
		Un\G15		Un\G15
Detailed parameter 1				Axis No.	1
Pr.[]	Item	Buffer memory address Un\G[]
		QD77MS16		QD77GF16
Pr.11	Backlash compensation amount	Un\G17		Un\G17
Pr.12	Software stroke limit upper limit value	Un\G18		Un\G18
		Un\G19		Un\G19
Pr.13	Software stroke limit lower limit value	Un\G20		Un\G20
		Un\G21		Un\G21
Pr.14	Software stroke limit selection	Un\G22		Un\G22
Pr.15	Software stroke limit valid/invalid setting	Un\G23		Un\G23
Pr.16	Command in-position width	Un\G24		Un\G24
		Un\G25		Un\G25
Pr.17	Torque limit setting value	Un\G26		Un\G26
Pr.18	M code ON signal output timing	Un\G27		Un\G27
Pr.19	Speed switching mode	Un\G28		Un\G28
Pr.20	Interpolation speed designation method	Un\G29		Un\G29
Pr.21	Current feed value during speed control	Un\G30		Un\G30
Pr.22	Input signal logic selection:Lower limit	Un\G31.0		Un\G31.0
	Input signal logic selection:Upper limit	Un\G31.1		Un\G31.1
	Input signal logic selection:Stop signal	Un\G31.3		Un\G31.3
	Input signal logic selection:External command switching signal	Un\G31.4		Un\G31.4
	Input signal logic selection:Near-point dog signal	Un\G31.6		Un\G31.6
	Input signal logic selection:Manual pulse generator input	Un\G31.8		Un\G31.8
Pr.80	External input signal selection	Un\G32		Un\G32
Pr.24	Manual pulse generator/Incremental synchronous encoder input selection	Un\G33		Un\G33
Pr.81	Speed-position function selection	Un\G34		Un\G34
Pr.82	Forced stop valid/invalid selection	Un\G35		Un\G35
Detailed parameter 2				Axis No.	1
Pr.[]	Item	Buffer memory address Un\G[]
		QD77MS16		QD77GF16
Pr.25	Acceleration time 1	Un\G36		Un\G36
		Un\G37		Un\G37
Pr.26	Acceleration time 2	Un\G38		Un\G38
		Un\G39		Un\G39
Pr.27	Acceleration time 3	Un\G40		Un\G40
		Un\G41		Un\G41
Pr.28	Deceleration time 1	Un\G42		Un\G42
		Un\G43		Un\G43
Pr.29	Deceleration time 2	Un\G44		Un\G44
		Un\G45		Un\G45
Pr.30	Deceleration time 3	Un\G46		Un\G46
		Un\G47		Un\G47
Pr.31	JOG speed limit value	Un\G48		Un\G48
		Un\G49		Un\G49
Pr.32	JOG operation acceleration time selection	Un\G50		Un\G50
Pr.33	JOG operation deceleration time selection	Un\G51		Un\G51
Pr.34	Acceleration/deceleration process selection	Un\G52		Un\G52
Pr.35	S-curve ratio	Un\G53		Un\G53
Pr.36	Sudden stop deceleration time	Un\G54		Un\G54
		Un\G55		Un\G55
Pr.37	Stop group 1 sudden stop selection	Un\G56		Un\G56
Pr.38	Stop group 2 sudden stop selection	Un\G57		Un\G57
Pr.39	Stop group 3 sudden stop selection	Un\G58		Un\G58
Pr.40	Positioning complete signal output time	Un\G59		Un\G59
Pr.41	Allowable error range for circular interpolation	Un\G60		Un\G60
		Un\G61		Un\G61
Pr.42	External command function selection	Un\G62		Un\G62
Pr.83	Speed control 10 x multiplier setting for degree axis	Un\G63		Un\G63
Pr.84	Restart allowable range when servo OFF to ON	Un\G64		Un\G64
		Un\G65		Un\G65
Pr.89	Manual pulse generator/Incremental synchronous encoder input type selection	Un\G67		Un\G67
Pr.90	Operation setting for speed-torque control mode:Torque initial value selection	Un\G68.4		Un\G68.4
	Operation setting for speed-torque control mode:Speed initial value selection	Un\G68.8		Un\G68.8
	Operation setting for speed-torque control mode:Condition selection at mode switching	Un\G68.12		Un\G68.12
Pr.95	External command signal selection	Un\G69		Un\G69
HPR basic parameter				Axis No.	1
Pr.[]	Item	Buffer memory address Un\G[]
		QD77MS16		QD77GF16
Pr.43	HPR method	Un\G70		Un\G70
Pr.44	HPR direction	Un\G71		Un\G71
Pr.45	HP address	Un\G72		Un\G72
		Un\G73		Un\G73
Pr.46	HPR speed	Un\G74		Un\G74
		Un\G75		Un\G75
Pr.47	Creep speed	Un\G76		Un\G76
		Un\G77		Un\G77
Pr.48	HPR retry	Un\G78		Un\G78
HPR detailed parameter				Axis No.	1
Pr.[]	Item	Buffer memory address Un\G[]
		QD77MS16		QD77GF16
Pr.50	Setting for the movement amount after near-point dog ON	Un\G80		Un\G80
		Un\G81		Un\G81
Pr.51	HPR acceleration time selection	Un\G82		Un\G82
Pr.52	HPR deceleration time selection	Un\G83		Un\G83
Pr.53	HP shift amount	Un\G84		Un\G84
		Un\G85		Un\G85
Pr.54	HPR torque limit value	Un\G86		Un\G86
Pr.55	Operation setting for incompletion of HPR	Un\G87		Un\G87
Pr.56	Speed designation during HP shift	Un\G88		Un\G88
Pr.57	Dwell time during HPR retry	Un\G89		Un\G89
Pr.86	Pulse conversion module : HPR request setting	Un\G90		-
Pr.87	Pulse conversion module : Waiting time after clear signal output	Un\G91		-
Expansion parameter				Axis No.	1
Pr.[]	Item	Buffer memory address Un\G[]
		QD77MS16		QD77GF16
Pr.91	Optional data monitor : Data type setting 1	Un\G100		-
Pr.92	Optional data monitor : Data type setting 2	Un\G101		-
Pr.93	Optional data monitor : Data type setting 3	Un\G102		-
Pr.94	Optional data monitor : Data type setting 4	Un\G103		-
Pr.96	Operation cycle setting	Un\G105		Un\G105
Pr.97	SSCNET setting	Un\G106		-
Pr.113	Servo parameter transfer	-		Un\G113
Pr.114	External command signal compensation valid/invalid setting	Un\G114		-

Basic setting parameter							Axis No.	1
Item	Buffer memory address Un\G[]
	QD77MS2		QD77MS4		QD77MS16		QD77GF16
Servo series	Un\G30100		Un\G30100		Un\G28400		-
Virtual Servo Amplifier Setting	-		-		-		Un\G28401
PA01	Un\G30101		Un\G30101		Un\G28401		Setting by this tool.
PA02	Un\G30102		Un\G30102		Un\G28402
PA03	Un\G30103		Un\G30103		Un\G28403
PA04	Un\G30104		Un\G30104		Un\G28404
PA05	Un\G30105		Un\G30105		Un\G28405
PA06	Un\G30106		Un\G30106		Un\G28406
PA07	Un\G30107		Un\G30107		Un\G28407
PA08	Un\G30108		Un\G30108		Un\G28408
PA09	Un\G30109		Un\G30109		Un\G28409
PA10	Un\G30110		Un\G30110		Un\G28410
PA11	Un\G30111		Un\G30111		Un\G28411
PA12	Un\G30112		Un\G30112		Un\G28412
PA13	Un\G30113		Un\G30113		Un\G28413
PA14	Un\G30114		Un\G30114		Un\G28414
PA15	Un\G30115		Un\G30115		Un\G28415
PA16	Un\G30116		Un\G30116		Un\G28416
PA17	Un\G30117		Un\G30117		Un\G28417
PA18	Un\G30118		Un\G30118		Un\G28418
PA19	Un\G30932		Un\G30932		Setting by this tool.
PA20	Un\G64400		Un\G64400		Un\G64400
PA21	Un\G64401		Un\G64401		Un\G64401
PA22	Un\G64402		Un\G64402		Un\G64402
PA23	Un\G64403		Un\G64403		Un\G64403
PA24	Un\G64404		Un\G64404		Un\G64404
PA25	Un\G64405		Un\G64405		Un\G64405
PA26	Un\G64406		Un\G64406		Un\G64406
PA27	Un\G64407		Un\G64407		Un\G64407
PA28	Un\G64408		Un\G64408		Un\G64408
PA29	Un\G64409		Un\G64409		Un\G64409
PA30	Un\G64410		Un\G64410		Un\G64410
PA31	Un\G64411		Un\G64411		Un\G64411
PA32	Un\G64412		Un\G64412		Un\G64412
Gain/filter setting parameter							Axis No.	1
Item	Buffer memory address Un\G[]
	QD77MS2		QD77MS4		QD77MS16		QD77GF16
PB01	Un\G30119		Un\G30119		Un\G28419		Setting by this tool.
PB02	Un\G30120		Un\G30120		Un\G28420
PB03	Un\G30121		Un\G30121		Un\G28421
PB04	Un\G30122		Un\G30122		Un\G28422
PB05	Un\G30123		Un\G30123		Un\G28423
PB06	Un\G30124		Un\G30124		Un\G28424
PB07	Un\G30125		Un\G30125		Un\G28425
PB08	Un\G30126		Un\G30126		Un\G28426
PB09	Un\G30127		Un\G30127		Un\G28427
PB10	Un\G30128		Un\G30128		Un\G28428
PB11	Un\G30129		Un\G30129		Un\G28429
PB12	Un\G30130		Un\G30130		Un\G28430
PB13	Un\G30131		Un\G30131		Un\G28431
PB14	Un\G30132		Un\G30132		Un\G28432
PB15	Un\G30133		Un\G30133		Un\G28433
PB16	Un\G30134		Un\G30134		Un\G28434
PB17	Un\G30135		Un\G30135		Un\G28435
PB18	Un\G30136		Un\G30136		Un\G28436
PB19	Un\G30137		Un\G30137		Un\G28437
PB20	Un\G30138		Un\G30138		Un\G28438
PB21	Un\G30139		Un\G30139		Un\G28439
PB22	Un\G30140		Un\G30140		Un\G28440
PB23	Un\G30141		Un\G30141		Un\G28441
PB24	Un\G30142		Un\G30142		Un\G28442
PB25	Un\G30143		Un\G30143		Un\G28443
BP26	Un\G30144		Un\G30144		Un\G28444
PB27	Un\G30145		Un\G30145		Un\G28445
PB28	Un\G30146		Un\G30146		Un\G28446
PB29	Un\G30147		Un\G30147		Un\G28447
PB30	Un\G30148		Un\G30148		Un\G28448
PB31	Un\G30149		Un\G30149		Un\G28449
PB32	Un\G30150		Un\G30150		Un\G28450
PB33	Un\G30151		Un\G30151		Un\G28451
PB34	Un\G30152		Un\G30152		Un\G28452
PB35	Un\G30153		Un\G30153		Un\G28453
PB36	Un\G30154		Un\G30154		Un\G28454
PB37	Un\G30155		Un\G30155		Un\G28455
PB38	Un\G30156		Un\G30156		Un\G28456
PB39	Un\G30157		Un\G30157		Un\G28457
PB40	Un\G30158		Un\G30158		Un\G28458
PB41	Un\G30159		Un\G30159		Un\G28459
PB42	Un\G30160		Un\G30160		Un\G28460
PB43	Un\G30161		Un\G30161		Un\G28461
PB44	Un\G30162		Un\G30162		Un\G28462
PB45	Un\G30163		Un\G30163		Un\G28463
PB46	Un\G64413		Un\G64413		Un\G64413
PB47	Un\G64414		Un\G64414		Un\G64414
PB48	Un\G64415		Un\G64415		Un\G64415
PB49	Un\G64416		Un\G64416		Un\G64416
PB50	Un\G64417		Un\G64417		Un\G64417
PB51	Un\G64418		Un\G64418		Un\G64418
PB52	Un\G64419		Un\G64419		Un\G64419
PB53	Un\G64420		Un\G64420		Un\G64420
PB54	Un\G64421		Un\G64421		Un\G64421
PB55	Un\G64422		Un\G64422		Un\G64422
PB56	Un\G64423		Un\G64423		Un\G64423
PB57	Un\G64424		Un\G64424		Un\G64424
PB58	Un\G64425		Un\G64425		Un\G64425
PB59	Un\G64426		Un\G64426		Un\G64426
PB60	Un\G64427		Un\G64427		Un\G64427
PB61	Un\G64428		Un\G64428		Un\G64428
PB62	Un\G64429		Un\G64429		Un\G64429
PB63	Un\G64430		Un\G64430		Un\G64430
PB64	Un\G64431		Un\G64431		Un\G64431
Expansion setting parameter							Axis No.	1
Item	Buffer memory address Un\G[]
	QD77MS2		QD77MS4		QD77MS16		QD77GF16
PC01	Un\G30164		Un\G30164		Un\G28464		Setting by this tool.
PC02	Un\G30165		Un\G30165		Un\G28465
PC03	Un\G30166		Un\G30166		Un\G28466
PC04	Un\G30167		Un\G30167		Un\G28467
PC05	Un\G30168		Un\G30168		Un\G28468
PC06	Un\G30169		Un\G30169		Un\G28469
PC07	Un\G30170		Un\G30170		Un\G28470
PC08	Un\G30171		Un\G30171		Un\G28471
PC09	Un\G30172		Un\G30172		Un\G28472
PC10	Un\G30173		Un\G30173		Un\G28473
PC11	Un\G30174		Un\G30174		Un\G28474
PC12	Un\G30175		Un\G30175		Un\G28475
PC13	Un\G30176		Un\G30176		Un\G28476
PC14	Un\G30177		Un\G30177		Un\G28477
PC15	Un\G30178		Un\G30178		Un\G28478
PC16	Un\G30179		Un\G30179		Un\G28479
PC17	Un\G30180		Un\G30180		Un\G28480
PC18	Un\G30181		Un\G30181		Un\G28481
PC19	Un\G30182		Un\G30182		Un\G28482
PC20	Un\G30183		Un\G30183		Un\G28483
PC21	Un\G30184		Un\G30184		Un\G28484
PC22	Un\G30185		Un\G30185		Un\G28485
PC23	Un\G30186		Un\G30186		Un\G28486
PC24	Un\G30187		Un\G30187		Un\G28487
PC25	Un\G30188		Un\G30188		Un\G28488
PC26	Un\G30189		Un\G30189		Un\G28489
PC27	Un\G30190		Un\G30190		Un\G28490
PC28	Un\G30191		Un\G30191		Un\G28491
PC29	Un\G30192		Un\G30192		Un\G28492
PC30	Un\G30193		Un\G30193		Un\G28493
PC31	Un\G30194		Un\G30194		Un\G28494
PC32	Un\G30195		Un\G30195		Un\G28495
PC33	Un\G64432		Un\G64432		Un\G64432
PC34	Un\G64433		Un\G64433		Un\G64433
PC35	Un\G64434		Un\G64434		Un\G64434
PC36	Un\G64435		Un\G64435		Un\G64435
PC37	Un\G64436		Un\G64436		Un\G64436
PC38	Un\G64437		Un\G64437		Un\G64437
PC39	Un\G64438		Un\G64438		Un\G64438
PC40	Un\G64439		Un\G64439		Un\G64439
PC41	Un\G64440		Un\G64440		Un\G64440
PC42	Un\G64441		Un\G64441		Un\G64441
PC43	Un\G64442		Un\G64442		Un\G64442
PC44	Un\G64443		Un\G64443		Un\G64443
PC45	Un\G64444		Un\G64444		Un\G64444
PC46	Un\G64445		Un\G64445		Un\G64445
PC47	Un\G64446		Un\G64446		Un\G64446
PC48	Un\G64447		Un\G64447		Un\G64447
PC49	Un\G64448		Un\G64448		Un\G64448
PC50	Un\G64449		Un\G64449		Un\G64449
PC51	Un\G64450		Un\G64450		Un\G64450
PC52	Un\G64451		Un\G64451		Un\G64451
PC53	Un\G64452		Un\G64452		Un\G64452
PC54	Un\G64453		Un\G64453		Un\G64453
PC55	Un\G64454		Un\G64454		Un\G64454
PC56	Un\G64455		Un\G64455		Un\G64455
PC57	Un\G64456		Un\G64456		Un\G64456
PC58	Un\G64457		Un\G64457		Un\G64457
PC59	Un\G64458		Un\G64458		Un\G64458
PC60	Un\G64459		Un\G64459		Un\G64459
PC61	Un\G64460		Un\G64460		Un\G64460
PC62	Un\G64461		Un\G64461		Un\G64461
PC63	Un\G64462		Un\G64462		Un\G64462
PC64	Un\G64463		Un\G64463		Un\G64463
Input/output setting parameter							Axis No.	1
Item	Buffer memory address Un\G[]
	QD77MS2		QD77MS4		QD77MS16		QD77GF16
PD01	Un\G30196		Un\G30196		Setting by this tool.		Setting by this tool.
PD02	Un\G30197		Un\G30197
PD03	Un\G30198		Un\G30198
PD04	Un\G30199		Un\G30199
PD05	Un\G30200		Un\G30200
PD06	Un\G30201		Un\G30201
PD07	Un\G30202		Un\G30202
PD08	Un\G30203		Un\G30203
PD09	Un\G30204		Un\G30204
PD10	Un\G30205		Un\G30205
PD11	Un\G30206		Un\G30206
PD12	Un\G30207		Un\G30207
PD13	Un\G30208		Un\G30208
PD14	Un\G30209		Un\G30209
PD15	Un\G30210		Un\G30210
PD16	Un\G30211		Un\G30211
PD17	Un\G30212		Un\G30212
PD18	Un\G30213		Un\G30213
PD19	Un\G30214		Un\G30214
PD20	Un\G30215		Un\G30215
PD21	Un\G30216		Un\G30216
PD22	Un\G30217		Un\G30217
PD23	Un\G30218		Un\G30218
PD24	Un\G30219		Un\G30219
PD25	Un\G30220		Un\G30220
PD26	Un\G30221		Un\G30221
PD27	Un\G30222		Un\G30222
PD28	Un\G30223		Un\G30223
PD29	Un\G30224		Un\G30224
PD30	Un\G30225		Un\G30225
PD31	Un\G30226		Un\G30226
PD32	Un\G30227		Un\G30227
PD33	Un\G64464		Un\G64464
PD34	Un\G64465		Un\G64465
PD35	Un\G64466		Un\G64466
PD36	Un\G64467		Un\G64467
PD37	Un\G64468		Un\G64468
PD38	Un\G64469		Un\G64469
PD39	Un\G64470		Un\G64470
PD40	Un\G64471		Un\G64471
PD41	Un\G64472		Un\G64472
PD42	Un\G64473		Un\G64473
PD43	Un\G64474		Un\G64474
PD44	Un\G64475		Un\G64475
PD45	Un\G64476		Un\G64476
PD46	Un\G64477		Un\G64477
PD47	Un\G64478		Un\G64478
PD48	Un\G64479		Un\G64479
Expansion control parameter							Axis No.	1
Item	Buffer memory address Un\G[]
	QD77MS2		QD77MS4		QD77MS16		QD77GF16
PE01	Un\G30228		Un\G30228		Setting by this tool.		Setting by this tool.
PE02	Un\G30229		Un\G30229
PE03	Un\G30230		Un\G30230
PE04	Un\G30231		Un\G30231
PE05	Un\G30232		Un\G30232
PE06	Un\G30233		Un\G30233
PE07	Un\G30234		Un\G30234
PE08	Un\G30235		Un\G30235
PE09	Un\G30236		Un\G30236
PE10	Un\G30237		Un\G30237
PE11	Un\G30238		Un\G30238
PE12	Un\G30239		Un\G30239
PE13	Un\G30240		Un\G30240
PE14	Un\G30241		Un\G30241
PE15	Un\G30242		Un\G30242
PE16	Un\G30243		Un\G30243
PE17	Un\G30244		Un\G30244
PE18	Un\G30245		Un\G30245
PE19	Un\G30246		Un\G30246
PE20	Un\G30247		Un\G30247
PE21	Un\G30248		Un\G30248
PE22	Un\G30249		Un\G30249
PE23	Un\G30250		Un\G30250
PE24	Un\G30251		Un\G30251
PE25	Un\G30252		Un\G30252
PE26	Un\G30253		Un\G30253
PE27	Un\G30254		Un\G30254
PE28	Un\G30255		Un\G30255
PE29	Un\G30256		Un\G30256
PE30	Un\G30257		Un\G30257
PE31	Un\G30258		Un\G30258
PE32	Un\G30259		Un\G30259
PE33	Un\G30260		Un\G30260
PE34	Un\G30261		Un\G30261
PE35	Un\G30262		Un\G30262
PE36	Un\G30263		Un\G30263
PE37	Un\G30264		Un\G30264
PE38	Un\G30265		Un\G30265
PE39	Un\G30266		Un\G30266
PE40	Un\G30267		Un\G30267
PE41	Un\G64480		Un\G64480
PE42	Un\G64481		Un\G64481
PE43	Un\G64482		Un\G64482
PE44	Un\G64483		Un\G64483
PE45	Un\G64484		Un\G64484
PE46	Un\G64485		Un\G64485
PE47	Un\G64486		Un\G64486
PE48	Un\G64487		Un\G64487
PE49	Un\G64488		Un\G64488
PE50	Un\G64489		Un\G64489
PE51	Un\G64490		Un\G64490
PE52	Un\G64491		Un\G64491
PE53	Un\G64492		Un\G64492
PE54	Un\G64493		Un\G64493
PE55	Un\G64494		Un\G64494
PE56	Un\G64495		Un\G64495
PE57	Un\G64496		Un\G64496
PE58	Un\G64497		Un\G64497
PE59	Un\G64498		Un\G64498
PE60	Un\G64499		Un\G64499
PE61	Un\G64500		Un\G64500
PE62	Un\G64501		Un\G64501
PE63	Un\G64502		Un\G64502
PE64	Un\G64503		Un\G64503
Special setting parameter							Axis No.	1
Item	Buffer memory address Un\G[]
	QD77MS2		QD77MS4		QD77MS16		QD77GF16
PS01	Un\G30268		Un\G30268		Setting by this tool.		Setting by this tool.
PS02	Un\G30269		Un\G30269
PS03	Un\G30270		Un\G30270
PS04	Un\G30271		Un\G30271
PS05	Un\G30272		Un\G30272
PS06	Un\G30273		Un\G30273
PS07	Un\G30274		Un\G30274
PS08	Un\G30275		Un\G30275
PS09	Un\G30276		Un\G30276
PS10	Un\G30277		Un\G30277
PS11	Un\G30278		Un\G30278
PS12	Un\G30279		Un\G30279
PS13	Un\G30280		Un\G30280
PS14	Un\G30281		Un\G30281
PS15	Un\G30282		Un\G30282
PS16	Un\G30283		Un\G30283
PS17	Un\G30284		Un\G30284
PS18	Un\G30285		Un\G30285
PS19	Un\G30286		Un\G30286
PS20	Un\G30287		Un\G30287
PS21	Un\G30288		Un\G30288
PS22	Un\G30289		Un\G30289
PS23	Un\G30290		Un\G30290
PS24	Un\G30291		Un\G30291
PS25	Un\G30292		Un\G30292
PS26	Un\G30293		Un\G30293
PS27	Un\G30294		Un\G30294
PS28	Un\G30295		Un\G30295
PS29	Un\G30296		Un\G30296
PS30	Un\G30297		Un\G30297
PS31	Un\G30298		Un\G30298
PS32	Un\G30299		Un\G30299
Other setting parameter							Axis No.	1
Item	Buffer memory address Un\G[]
	QD77MS2		QD77MS4		QD77MS16		QD77GF16
PF01	Un\G30900		Un\G30900		Setting by this tool.		Setting by this tool.
PF02	Un\G30901		Un\G30901
PF03	Un\G30902		Un\G30902
PF04	Un\G30903		Un\G30903
PF05	Un\G30904		Un\G30904
PF06	Un\G30905		Un\G30905
PF07	Un\G30906		Un\G30906
PF08	Un\G30907		Un\G30907
PF09	Un\G30908		Un\G30908
PF10	Un\G30909		Un\G30909
PF11	Un\G30910		Un\G30910
PF12	Un\G30911		Un\G30911
PF13	Un\G30912		Un\G30912
PF14	Un\G30913		Un\G30913
PF15	Un\G30914		Un\G30914
PF16	Un\G30915		Un\G30915
PF17	Un\G64504		Un\G64504
PF18	Un\G64505		Un\G64505
PF19	Un\G64506		Un\G64506
PF20	Un\G64507		Un\G64507
PF21	Un\G64508		Un\G64508
PF22	Un\G64509		Un\G64509
PF23	Un\G64510		Un\G64510
PF24	Un\G64511		Un\G64511
PF25	Un\G64512		Un\G64512
PF26	Un\G64513		Un\G64513
PF27	Un\G64514		Un\G64514
PF28	Un\G64515		Un\G64515
PF29	Un\G64516		Un\G64516
PF30	Un\G64517		Un\G64517
PF31	Un\G64518		Un\G64518
PF32	Un\G64519		Un\G64519
PF33	Un\G64520		Un\G64520
PF34	Un\G64521		Un\G64521
PF35	Un\G64522		Un\G64522
PF36	Un\G64523		Un\G64523
PF37	Un\G64524		Un\G64524
PF38	Un\G64525		Un\G64525
PF39	Un\G64526		Un\G64526
PF40	Un\G64527		Un\G64527
PF41	Un\G64528		Un\G64528
PF42	Un\G64529		Un\G64529
PF43	Un\G64530		Un\G64530
PF44	Un\G64531		Un\G64531
PF45	Un\G64532		Un\G64532
PF46	Un\G64533		Un\G64533
PF47	Un\G64534		Un\G64534
PF48	Un\G64535		Un\G64535
Option unit setting parameter							Axis No.	1
Item	Buffer memory address Un\G[]
	QD77MS2		QD77MS4		QD77MS16		QD77GF16
PO01	Un\G30916		Un\G30916		Setting by this tool.		Setting by this tool.
PO02	Un\G30917		Un\G30917
PO03	Un\G30918		Un\G30918
PO04	Un\G30919		Un\G30919
PO05	Un\G30920		Un\G30920
PO06	Un\G30921		Un\G30921
PO07	Un\G30922		Un\G30922
PO08	Un\G30923		Un\G30923
PO09	Un\G30924		Un\G30924
PO10	Un\G30925		Un\G30925
PO11	Un\G30926		Un\G30926
PO12	Un\G30927		Un\G30927
PO13	Un\G30928		Un\G30928
PO14	Un\G30929		Un\G30929
PO15	Un\G30930		Un\G30930
PO16	Un\G30931		Un\G30931
PO17	Un\G64536		Un\G64536
PO18	Un\G64537		Un\G64537
PO19	Un\G64538		Un\G64538
PO20	Un\G64539		Un\G64539
PO21	Un\G64540		Un\G64540
PO22	Un\G64541		Un\G64541
PO23	Un\G64542		Un\G64542
PO24	Un\G64543		Un\G64543
PO25	Un\G64544		Un\G64544
PO26	Un\G64545		Un\G64545
PO27	Un\G64546		Un\G64546
PO28	Un\G64547		Un\G64547
PO29	Un\G64548		Un\G64548
PO30	Un\G64549		Un\G64549
PO31	Un\G64550		Un\G64550
PO32	Un\G64551		Un\G64551
Linear/DD motor setting paramter							Axis No.	1
Item	Buffer memory address Un\G[]
	QD77MS2		QD77MS4		QD77MS16		QD77GF16
PL01	Un\G64552		Un\G64552		Setting by this tool.		Setting by this tool.
PL02	Un\G64553		Un\G64553
PL03	Un\G64554		Un\G64554
PL04	Un\G64555		Un\G64555
PL05	Un\G64556		Un\G64556
PL06	Un\G64557		Un\G64557
PL07	Un\G64558		Un\G64558
PL08	Un\G64559		Un\G64559
PL09	Un\G64560		Un\G64560
PL10	Un\G64561		Un\G64561
PL11	Un\G64562		Un\G64562
PL12	Un\G64563		Un\G64563
PL13	Un\G64564		Un\G64564
PL14	Un\G64565		Un\G64565
PL15	Un\G64566		Un\G64566
PL16	Un\G64567		Un\G64567
PL17	Un\G64568		Un\G64568
PL18	Un\G64569		Un\G64569
PL19	Un\G64570		Un\G64570
PL20	Un\G64571		Un\G64571
PL21	Un\G64572		Un\G64572
PL22	Un\G64573		Un\G64573
PL23	Un\G64574		Un\G64574
PL24	Un\G64575		Un\G64575
PL25	Un\G64576		Un\G64576
PL26	Un\G64577		Un\G64577
PL27	Un\G64578		Un\G64578
PL28	Un\G64579		Un\G64579
PL29	Un\G64580		Un\G64580
PL30	Un\G64581		Un\G64581
PL31	Un\G64582		Un\G64582
PL32	Un\G64583		Un\G64583
PL33	Un\G64584		Un\G64584
PL34	Un\G64585		Un\G64585
PL35	Un\G64586		Un\G64586
PL36	Un\G64587		Un\G64587
PL37	Un\G64588		Un\G64588
PL38	Un\G64589		Un\G64589
PL39	Un\G64590		Un\G64590
PL40	Un\G64591		Un\G64591
PL41	Un\G64592		Un\G64592
PL42	Un\G64593		Un\G64593
PL43	Un\G64594		Un\G64594
PL44	Un\G64595		Un\G64595
PL45	Un\G64596		Un\G64596
PL46	Un\G64597		Un\G64597
PL47	Un\G64598		Un\G64598
PL48	Un\G64599		Un\G64599
POsitioning control setting parameter							Axis No.	1
Item	Buffer memory address Un\G[]
	QD77MS2		QD77MS4		QD77MS16		QD77GF16
PT01	Un\G64600		Un\G64600		Setting by this tool.		Setting by this tool.
PT02	Un\G64601		Un\G64601
PT03	Un\G64602		Un\G64602
PT04	Un\G64603		Un\G64603
PT05	Un\G64604		Un\G64604
PT06	Un\G64605		Un\G64605
PT07	Un\G64606		Un\G64606
PT08	Un\G64607		Un\G64607
PT09	Un\G64608		Un\G64608
PT10	Un\G64609		Un\G64609
PT11	Un\G64610		Un\G64610
PT12	Un\G64611		Un\G64611
PT13	Un\G64612		Un\G64612
PT14	Un\G64613		Un\G64613
PT15	Un\G64614		Un\G64614
PT16	Un\G64615		Un\G64615
PT17	Un\G64616		Un\G64616
PT18	Un\G64617		Un\G64617
PT19	Un\G64618		Un\G64618
PT20	Un\G64619		Un\G64619
PT21	Un\G64620		Un\G64620
PT22	Un\G64621		Un\G64621
PT23	Un\G64622		Un\G64622
PT24	Un\G64623		Un\G64623
PT25	Un\G64624		Un\G64624
PT26	Un\G64625		Un\G64625
PT27	Un\G64626		Un\G64626
PT28	Un\G64627		Un\G64627
PT29	Un\G64628		Un\G64628
PT30	Un\G64629		Un\G64629
PT31	Un\G64630		Un\G64630
PT32	Un\G64631		Un\G64631
PT33	Un\G64632		Un\G64632
PT34	Un\G64633		Un\G64633
PT35	Un\G64634		Un\G64634
PT36	Un\G64635		Un\G64635
PT37	Un\G64636		Un\G64636
PT38	Un\G64637		Un\G64637
PT39	Un\G64638		Un\G64638
PT40	Un\G64639		Un\G64639
PT41	Un\G64640		Un\G64640
PT42	Un\G64641		Un\G64641
PT43	Un\G64642		Un\G64642
PT44	Un\G64643		Un\G64643
PT45	Un\G64644		Un\G64644
PT46	Un\G64645		Un\G64645
PT47	Un\G64646		Un\G64646
PT48	Un\G64647		Un\G64647

이거 파일은 어디서 구한건지.. 아무튼 유용하게 쓰고 있음!!

반응 좋으면 2~16축까지 다 올릴께요!!